36V 500W front wheel kit, hot to wire it

[boysen]

I´m new with e-bikes, and would need help how to wire the kit, any clear pictures available? Thanks!

[Perbear]

There are nice pictures of cabling on the goldenmotor web site for all controllers:
Cruise: http://www.goldenmotor.com/e-Bike-DIY/Cruise%20Controller%20Wiring%20Diagram.pdf
Regen: http://www.goldenmotor.com/e-Bike-DIY/BLDC%20Regen%20Controller%20Wiring%20Diagram%200807.pdf
Standard: http://www.goldenmotor.com/Controller-CAD.pdf

Good luck!

Per

[boysen]

Thank you, I have the wires to motor plugged! I´ve got still three plugs without cable....ie. what should be plugged into the third from left (wire that comes beside the throttle)? And the other two? Hopefully the picture link works.

http://i42.tinypic.com/2u9lv79.jpg

[boysen]

For the new BAC281 controller the two wires next to the three throttle wires are the reverse button wires.

  Now only two to solve....Damn I can´t see the right order from the diagram pictures.

[Perbear]

Now only two to solve....Damn I can´t see the right order from the diagram pictures.

Go to the SECOND page of the cruise controller schematic and zoom in - then you can read the letter coding.

Good luck!

Perbear

[Helgeo]

Thank you, I have the wires to motor plugged! I´ve got still three plugs without cable....ie. what should be plugged into the third from left (wire that comes beside the throttle)? And the other two? Hopefully the picture link works.

White and black is for the brake sensors. Orange and black is for the cruise control - red button on the unit with red + green button. The green button is for the horn, but that is not pre-wired on the big connector on the controller.