« previous next »
Pages: [1]   Go Down

Author Topic: MagicPie and throttle control Voltage problem  (Read 4078 times)

Offline urosv

  • Confirmed
  • Magic Undergrad
  • ***
  • Posts: 51
    • GoldenMotor Slovenia, Croatia
MagicPie and throttle control Voltage problem
« on: January 21, 2011, 10:57:27 AM »
Hi Guys...
I have a few 48V batteries and as I see the throttle control is set up to 36V? Is there any way to solve this at home or must I order 48V throttle controls. When I got MagicPie I connected, the batterie level says green :) and we went for a ride. Now the indicator still indicate full hehe but battery is dead, and recharging.

Any ideas to solve this.

Logged

Offline Bikemad

  • Global Moderator
  • Professor
  • PhD. Magic
  • ******
  • Posts: 5,553
Re: MagicPie and throttle control Voltage problem
« Reply #1 on: January 21, 2011, 12:21:18 PM »
You will need to fit a suitable resistor into the green wire which supplies the voltage to the battery meter.

Check out this post and this post for more details.

Alan
 
« Last Edit: January 21, 2011, 12:30:39 PM by Bikemad »
Logged
Pages: [1]   Go Up
« previous next »