« previous next »
Pages: [1]   Go Down

Author Topic: 36 volt, 600 watt Hub Motor change for 48V/50A controller  (Read 11279 times)

Offline Mbra

  • Confirmed
  • New Member
  • *
  • Posts: 1
36 volt, 600 watt Hub Motor change for 48V/50A controller
« on: June 29, 2009, 06:58:05 PM »
I have Wilderness Energy Brushless 36 volt, 600 watt Hub Motor I want to know if I can change for the new
  48V/50A Cruise Speed Controller  thank you.
« Last Edit: June 30, 2009, 01:19:10 PM by mbra »
Logged

Offline e-lmer

  • Technical Officer
  • Master of Magic
  • ******
  • Posts: 458
    • My page
Re: 36 volt, 600 watt Hub Motor change for 48V/50A controller
« Reply #1 on: July 01, 2009, 10:15:02 PM »

You would have to contact Wilderness Energy to get the
actual max wattage for that motor.

I suspect that you risk burning out the motor by putting the
higher voltage controller on it.

Wattage is (basically) voltage times Amperage.
600W/36V is just under 17Amps continuous.

The 48V controller is 1000W, (About 20Amps continuous)

Logged
Pages: [1]   Go Up
« previous next »