« previous next »
Pages: [1]   Go Down

Author Topic: How to replace Hall Sensors  (Read 10878 times)

Offline Just

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 470
How to replace Hall Sensors
« on: February 18, 2013, 10:33:28 AM »
Hi All,

Could someone provide instructions how to replace Hall Sensors in the Hub Motor?

I actually searched the web for the relevant videos, but did not find any useful.

Thank you!
Logged

Offline Lollandster

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 186
  • Norway
Re: How to replace Hall Sensors
« Reply #1 on: February 18, 2013, 12:00:20 PM »
Logged
Disclaimer: I know nothing.
My ebike Build blog

Offline Just

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 470
Re: How to replace Hall Sensors
« Reply #2 on: February 18, 2013, 05:50:40 PM »
I saw this video - nothing helpful. Unfortunately I destroyed my hall sensors while trying to dismount them from the motor (they are ceramic and too small...) 

Should the Hall Sensors be glued inside of the motor?
Logged

Offline Lollandster

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 186
  • Norway
Re: How to replace Hall Sensors
« Reply #3 on: February 18, 2013, 06:36:48 PM »
Quote from: just on February 18, 2013, 05:50:40 PM
Should the Hall Sensors be glued inside of the motor?
I am pretty sure you would know if you actually saw the video.
Logged
Disclaimer: I know nothing.
My ebike Build blog

Offline Just

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 470
Re: How to replace Hall Sensors
« Reply #4 on: February 18, 2013, 06:44:59 PM »
Hm... I write and read in English, but badly understand a spoken one :-)

Could you provide the key points from the video? :-)

Thanks!
Logged

Offline Lollandster

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 186
  • Norway
Re: How to replace Hall Sensors
« Reply #5 on: February 18, 2013, 06:47:23 PM »
I just mean that he shows the gluing process and that it should be visible at that point. I haven't done this myself so I don't really know how well it is explained.
Logged
Disclaimer: I know nothing.
My ebike Build blog

Offline MAGICPIE3FOCUSPOWER

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 372
Re: How to replace Hall Sensors
« Reply #6 on: February 18, 2013, 09:24:04 PM »
It's quite simple just just a small screwdriver  or a strong knive to get the old sensors out.
The are glued very well.

Install the new ones with very small amount of expoxy glue.

And as finish touch use some kit to cover the sensors pins for preventing shorting due e.g. water etc.
Logged

Offline Just

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 470
Re: How to replace Hall Sensors
« Reply #7 on: February 18, 2013, 09:43:02 PM »
Thanks! What Hall Sensors would you recommend? Please provide exact model#. Thank you again for sharing your knowledge!
Logged

Offline MAGICPIE3FOCUSPOWER

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 372
Re: How to replace Hall Sensors
« Reply #8 on: February 18, 2013, 10:32:19 PM »
Just  use Honeywell SS41 is fine.
Running time of these sensor are now greater then 2500 km.
Still working...
Logged

Offline Just

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 470
Re: How to replace Hall Sensors
« Reply #9 on: February 18, 2013, 10:51:48 PM »
SS41... Could you please provide a full part number or a link to the Hall Sensor? Thanks!
Logged

Offline Just

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 470
Re: How to replace Hall Sensors
« Reply #10 on: February 18, 2013, 11:09:30 PM »
There are Hall Sensors with Low-, Medium- and High- Gauss... Which is best?
Logged

Offline Bikemad

  • Global Moderator
  • Professor
  • PhD. Magic
  • ******
  • Posts: 5,553
Re: Honeywell SS41 hall sensors
« Reply #11 on: February 19, 2013, 12:30:39 AM »
Quote from: just on February 18, 2013, 10:51:48 PM
SS41... Could you please provide a full part number or a link to the Hall Sensor? Thanks!

The Honeywell SS41 hall sensor is commonly used as a replacement and can be purchased from most electrical component suppliers, but if you can't find them at your local supplier, check out this post on ES regarding purchasing hall sensors.

Alan
 
Logged
Pages: [1]   Go Up
« previous next »