Author Topic: Where do I find the molex connectors used with the magic controller?  (Read 8568 times)

Offline Sangesf

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 180
I've checked radio shack to no avail. 
Do I have to get the connectors (from the controller to the hall sensors/horn/everything else) from GoldenMotor or is there somewhere else that has those kinds of connectors? (Controller side connectors)

I lost all the connectors during a move...

Offline Hardcore

  • Confirmed
  • Master of Magic
  • *****
  • Posts: 422
Re: Where do I find the molex connectors used with the magic controller?
« Reply #1 on: December 20, 2010, 10:01:41 PM »
can't u use every type of connector you want???
is it just reconnecting the wires, if so then why not solder directly?

Offline Sangesf

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 180
Re: Where do I find the molex connectors used with the magic controller?
« Reply #2 on: December 20, 2010, 11:23:04 PM »
can't u use every type of connector you want???
is it just reconnecting the wires, if so then why not solder directly?

I need the CONTROLLER SIDE connectors.
I'm not going to solder anything..  All I want are $1 connectors.   
« Last Edit: December 20, 2010, 11:26:15 PM by sangesf »

Offline MonkeyMagic

  • Cheeky Chimp
  • Technical Officer
  • PhD. Magic
  • ******
  • Posts: 1,041
Re: Where do I find the molex connectors used with the magic controller?
« Reply #3 on: December 21, 2010, 04:32:30 AM »
Ok well there is ebay, computer shops and old computer power supply connectors to name a couple of starters...
Unless you recycle, I think you will be up for a tad more than $1 a connector there my solderless friend.

I bet if you choose a box to look in, then pick the complete opposite to it, your connectors will be in there. Lol for some reason when I lose something in a box, its always the last one I look in!!

Or the first one, underneath something else haha


Offline Sangesf

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 180
Re: Where do I find the molex connectors used with the magic controller?
« Reply #4 on: December 23, 2010, 05:05:54 PM »
Yeah, Been there, done that.  I haven't been able to find any internal PC component molex connectors that are the same as the magic controller.
It looks like it's either solder time or $35 from GM.
Oh well, I tried.

Offline MonkeyMagic

  • Cheeky Chimp
  • Technical Officer
  • PhD. Magic
  • ******
  • Posts: 1,041
Re: Where do I find the molex connectors used with the magic controller?
« Reply #5 on: December 24, 2010, 06:57:22 AM »
Hey couldn't you just cut a ATX power supply plug to size?

I dunno just fork out $35 man you get a power cable too don't you ;) yay