Author Topic: GM motors, controllers,and battery compatability  (Read 15290 times)

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
GM motors, controllers,and battery compatability
« on: October 19, 2010, 10:00:06 AM »
Are items interchangable with GM parts?

for example would a frog syle battery............


.....simply plug into a Prokit 901 (motor and controller)




I understand that battey and motor voltage would have to be the same. but are all  lead connectors the same.

i suppose a great benefit of the MP is the is that it can accept versitile voltages
« Last Edit: October 19, 2010, 10:08:16 AM by brumbrum »

Offline Bikemad

  • Global Moderator
  • Professor
  • PhD. Magic
  • ******
  • Posts: 5,553
Re: GM motors, controllers,and battery compatability
« Reply #1 on: October 19, 2010, 10:55:52 AM »
would a frog sTyle battery simply plug into a Prokit 901 (motor and controller)

I don't know if they use the same connector or not, but I know a man who does:

I'm sure Gary will be around later to answer this question.

Alan
 
« Last Edit: June 30, 2017, 08:55:29 PM by Bikemad »

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
Re: GM motors, controllers,and battery compatability
« Reply #2 on: October 19, 2010, 12:00:49 PM »
cheers Alan.   ;D

Offline Sundsvall

  • Confirmed
  • Bachelor of Magic
  • ****
  • Posts: 167
  • N 62° 23', E 17° 19'
Re: GM motors, controllers,and battery compatability
« Reply #3 on: October 19, 2010, 04:26:28 PM »
As I will recall there are no connectors on the froggie. I have fitted the controller in the box underneath it so it became a very neat installation and extremely short cables between the battery and the controller. The froggie is placed just above the pedals and not under the seat.

Remember there is a small battery so the amount of amps should be limited.

Peter
Midsummer sun = up 02:54   down 22:51   angle 51,0° :)
Midwinter sun =    up 09:19   down14:18   angle 4,2° :(
Mean annual temperature = 3,1°C

Offline TOM

  • Confirmed
  • Magic Undergrad
  • ***
  • Posts: 86
Re: GM motors, controllers,and battery compatability
« Reply #4 on: October 19, 2010, 04:49:32 PM »
If just buy a frog battery, connector(N/A);
If buy a kit with battery,include all kinds of connector.

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
Re: GM motors, controllers,and battery compatability
« Reply #5 on: October 19, 2010, 04:54:36 PM »
thanks Tom ;D    but the frog battery is not offered as part of the DIY kit on the website. only the box batteries
« Last Edit: October 19, 2010, 04:56:31 PM by brumbrum »

Offline TOM

  • Confirmed
  • Magic Undergrad
  • ***
  • Posts: 86
Re: GM motors, controllers,and battery compatability
« Reply #6 on: October 19, 2010, 06:24:25 PM »
Oh,thanks.I will ask them to add this frog battery on D.I.Y List.

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
Re: GM motors, controllers,and battery compatability
« Reply #7 on: October 19, 2010, 06:28:41 PM »
cool!

and thanks for sorting my Magic Pie wheel rim problem

Andrew :)

Offline GM Canada

  • Super Gary
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 1,544
Re: GM motors, controllers,and battery compatability
« Reply #8 on: October 20, 2010, 12:41:32 AM »
would a frog syle battery simply plug into a Prokit 901 (motor and controller)

I don't know if they use the same connector or not, but I know a man who does:

I'm sure Gary will be around later to answer this question.

Alan
 

Haha, My wife says that looks just like me!

Anyway the Frog style battery currently only has 2 wires coming from the bottom. One red and one black. Tom was telling me there will be a connector plug on the frog style batteries in the near future, but not sure what it will look like. I also added these batteries to my site as well as the build you own kit page. I didnt realize they were not even listed  :-[

Gary
« Last Edit: July 05, 2017, 06:21:02 PM by Bikemad »

Offline GM Canada

  • Super Gary
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 1,544
Re: GM motors, controllers,and battery compatability
« Reply #9 on: October 21, 2010, 01:35:24 PM »
Looks like this will be the frog battery plug in the very near future. The blue and red plugs on the right are the current hookup and the plug on the left the new plug.

Gary
« Last Edit: October 21, 2010, 01:37:06 PM by GM Canada »

Offline MonkeyMagic

  • Cheeky Chimp
  • Technical Officer
  • PhD. Magic
  • ******
  • Posts: 1,041
Re: GM motors, controllers,and battery compatability
« Reply #10 on: October 21, 2010, 02:35:30 PM »
Gary I'm SO glad you changed your profile pic to that one.... haha good work

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
Re: GM motors, controllers,and battery compatability
« Reply #11 on: October 21, 2010, 03:04:03 PM »
i like the idea of being able to interchange motors and batteries. It could become a good way that GM future proof products as they evolve and come onto the market. Easy 'Plug n Play' modifications, and it could prevent older products from becoming obsolete or uncompatible.


By the way Gary,,   I love the quiff    ;)
« Last Edit: October 21, 2010, 03:05:59 PM by brumbrum »

Offline GM Canada

  • Super Gary
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 1,544
Re: GM motors, controllers,and battery compatability
« Reply #12 on: October 21, 2010, 09:02:11 PM »
Speaking of interchangable. Well its really not interchangable but easy to remove. If you have ever had a flat or wanted to remove your wheel to get it trued. It is such a hassle to take a wheel off that has an external controller as the wires are usually tucked away in a controller box or pouch. I had a front wheel flat and what a pleasure it was to simply unplug my pie and pop off the wheel. Then I fixed it easily on a picnic table in the park and put it back on plugged it in and off it went!

WooHoo!

Gary

BTW what is a quiff? Do you mean the super hero outfit? At first I thought it was silly but now Im thinking of wearing one full time!
 

Offline Leslie

  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 2,047
Re: GM motors, controllers,and battery compatability
« Reply #13 on: October 22, 2010, 12:24:26 AM »
One thing I am noticing on the 16 cell lifepo4 batteries.  Is my charger is set to 61.4v

My MP magic controller has a HVC at 59.8v  Hot off the charger I have to wait under 3 mins for the volts to drop to 59.7v before the bike throttle will operate.

Bring it on

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
Re: GM motors, controllers,and battery compatability
« Reply #14 on: October 22, 2010, 05:52:15 AM »
BTW what is a quiff? Do you mean the super hero outfit? At first I thought it was silly but now Im thinking of wearing one full time!


a quiff is a hair syle where the front is brushed up, made popular in the 1950's - 60's with the 'Teddy boy' movement and rock n roll




Also popular with super heros 8)