1.* Through the E+ Advanced LCD display unit, the E+ can be set into one of nine different "fitness" modes which turns the motor into a generator and charges the battery as you pedal. Basically, the higher the resistance the more you charge the battery - become your own human electricity generator!
2.* Each time either brake lever is pressed, the motor is used to help slow the vehicle down through regenerative braking. The energy created by the motor spinning is used to charge the battery as the vehicle slows down.
3. Plug in the NiMH Smart Battery Charger into your 115VAC or 230VAC wall outlet and the other end into the battery power cable, and fully charge your battery in a few hours.
* The E+ Electric Bike system will only allow charging via this method if the battery temperature, voltage, and state of charge are within safe limits for the battery.
The E+ has a LCD display unit that combines functions of a bike computer with that of an electric vehicle. It provides quick access to riding information such as bike speed, odometer, battery charge remaining, and much more. The E+ display can also be used to enable a security mode that locks the rear wheel, and can be removed from the bike for ultimate security. Plus, it has a LED backlight so the display can be used early in the morning or at night!
That's what I was talking about at the Magic Pie Feedback
Nice LCD! But with the pie they should do this panel with BLUETOOTH. Keep the controls wired, but let the info and set up be made by an nice bluetooth lcd panel