The photos are in the picasa album linked before
The package came protected with bubble wrap, which did not appear to tears or the like. The cardboard packaging has a low mark of an impact.
The lanterns were loose in the box, the headlight should be apparent in a box, I did not find a box to the taillight. The latter came cracked, but nothing to stop working.
The other components were very well protected, nothing came damaged in any way.
I expected a more professional package with Styrofoam corners where their cavities were placed on the smaller components, for example. Here is all the content inside the box after being removed.
http://picasaweb.google.com.br/lh/photo/23ghcbVlMgFu_BmJRgsIWg?authkey=Gv1sRgCODfiIXslNPCqwE&feat=directlink Came:
• Magic Pie mounted on the wheel with nuts and washers.
• Accelerators type twist and thumb
• Key Cruise-control with button to turn off the PAS
• PAS
• Cables Pie
• Harness the battery (separate from the cable pie could have come with some type of standard connector.
• Battery LiMn 48v12Ah with the keys and bi-volt charger Manual 3A
• Rack and former board fixing battery
• Package with extra connectors
What was missing:
• Screws for fixing the plate in the rack
• Cable Lantern front
• Set of disc brakes
• Extra connector, red, to match the color pattern of Pie
• The keys of the CC were not with the connectors.
The engine has good looks and quality, all the screws come with washers. The rim is double-walled, with appearance of great quality and resistance. The spokes are very robust and stood firm. The rim came with the sealing tape inside!
I tested the fit of the wheel quickly before going to the workshop and it was not centered, as we have seen, there was no room for the internal washers. My bike mechanic solved it easily with just two precise strokes with a rubber hammer at the bike aft triangle. The rim still not completely centered, but was enough. I'll NEED THE DISK BRAKES, they are like 4x more expensive here. So, for now I'll put one on the motor and leave the v-brake in front.
The other components of the kit are of great finish, I feel that the plastics are of good quality and the keys of the CC did not come with the plug fitted. Lanterns looks fragile, came back and checked the lamp to 36V but it worked well with the 48v battery. The lamp appears to have eight points, but only four light indeed. One of the lights came without the cable, none of them had indication of polarity. The connectors are very easy to assemble, even without special tools. I used the red key on and off independently headlights front and rear.
The rack, which was not dented or bent, came apart and without the screws to secure the battery plate on my table and do not possess the holes for this type of rack. The backing plate and slide the locking bolt very superficially, the shoulder should be higher. There is a pin that I believe will serve to limit the travel of the battery, he did not touch him. I'll have to solve that too.There is a gap between the rail and the battery, it seems "loose" and together with the locking pin shy of the impression that bumps the battery will start from there.
The battery seems good quality, sturdy plastic and firm, pleasant to the touch. By shaking the pack to feel the loose in La, as it moved about 1cm forward and backward. I'll have to solve it.The battery came with 58v measured on a multimeter crap. It took about half an hour to recharge. It came with a sticker with important information for care. All I showed was very impressed with the appearance quality of each piece.
The charger has the appearance of great quality and also good finish. The internal fan makes some noise, nothing more, this sound is sense of security. The power supply came with an unknown pattern (Chinese?), But the connector on the device is the same type of sources of PC so it was easy to find a replacement. It can operate on 110v or 220v via a switch, has two LEDs, an indication of on / off and another charge state, orange for charging and green for charged. The fan turns off when finished loading. It also has a key on / off switch and a fuse.
No instructions came on the charger for common sense I connect the cable on the battery only when it is turned off and unplugged from the bike and then switch on the charger, also turning it off before unplugging the cable.
The installation of the mechanical part was extremely simple. It took about two and a half and much to adapt to the rack. I really believe that the 002 is much better in that sense. It was necessary to drill the frame and use a rivet with thread, the appearance is of an original piece.After all the control components, engine, speed, etc.. are also installed the mechanic said:
"The part of mechanics ready ta, end there the electric"
I connected the blue on blue, green on green, black on black, etc, turned on the battery and ready, was working.
In fact, before I had to solder the battery cable with the power of pie. Connectors Cruise-control, lights etc.. I did quickly and was very simple. But I have knowledge of electrical and a multimeter to test, switches, polarity, etc.. As well as to mount connectors, other customers may have problems with this. But it was really quite simple, worked first.
This time the cables were still all a bit loose and tied them down to the table with tape, anyway, just to test. We did the check list, put on the street e. ..
Very cool! The feeling of acceleration is great, comfortable. It makes a noise that I at least think pleasant. Cycling is pulled in a very big difference and I had no problems or torn in the process in highly inclined, do not know how, but weight 110kg.
Today, I finished organizing the cables with zip-ties and got a very clean appearance. I had to hold the battery with rubber bands, as there is a gap between the battery and card, I walk by or cobblestone streets waving the battery is noisy rattling back there. I'll have to solve it.
Only scored the maximum speed 44 km / h, I am without my watt meter yet. Nor marked time use, recharge etc.. I'm trying to use as one would use on a daily basis at the beginning.Whenever I get chance to put the battery check, did not even score half battery.
I got home from the workshop with her last night. Today I used to go back there, then went to the market, I came home, went to work. At home and at work let the battery to recharge, but the work was hard, I let a lot of friends try it.
I also discovered that the pie has a buzzer, I thought it had not. I had forgotten to connect the control's cable o the pie and when I turned it on did beeps, and solved the problem without difficulty.
We use a few bolts of poor quality, without washers, and this has caused some of them got lost, tomorrow I'll buy better quality bolts and locking nuts to prevent loosening with vibration.
As for disc brakes, just not a problem because I will be making a new request soon, but if it were the case would have been pretty bad. It's quite annoying not receive the product they bought.
Edit: ps.: I'm felling very lazy so I used the google translate tool
please tell me if you find anything unusual.
