« previous next »
Pages: [1]   Go Down

Author Topic: one GM brake lever to two external controllers for motor cut-off  (Read 7094 times)

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
one GM brake lever to two external controllers for motor cut-off
« on: April 21, 2011, 11:33:16 AM »
 How easy is it to wire GM brakes to both controllers in order that both motors cut out when only one brake lever is pulled. I'm sure it's easy but I don't(as yet) have the parts in front of me to work it out!
  Is there a diagram? :)
Logged

Offline DirtyGinge

  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 614
  • Im just trying to find my niche.3 e-bikes is fine
Re: one GM brake lever to two external controllers for motor cut-off
« Reply #1 on: April 21, 2011, 04:34:11 PM »
I just wired the wiring from the brakes, and connected with both sets of brake wires from the controller, worked fine :D
Logged
Infineon lyen edition 12 Fet
Goldenmotor Magic pie rear ....2000 Watt peak
oh yea.....Im too fat :)...but cute, oh yea, im cute

Offline krelle52

  • Confirmed
  • New Member
  • *
  • Posts: 23
Re: one GM brake lever to two external controllers for motor cut-off
« Reply #2 on: April 21, 2011, 04:41:44 PM »
Hi andrew

First I thought it was easy, but now I'm slightly in doubt about the need for the brake to be connected to z terminal on both controller. I made a quick diagram. This is my suggestion and I'm pretty sure it's right. But I would like a second opinion!

/ Krelle52

Logged

Offline krelle52

  • Confirmed
  • New Member
  • *
  • Posts: 23
Re: one GM brake lever to two external controllers for motor cut-off
« Reply #3 on: April 21, 2011, 04:59:57 PM »
There was someone faster than me. :)
Logged

Offline Andrew

  • AKA The Artful Bodger
  • Confirmed
  • PhD. Magic
  • ******
  • Posts: 717
  • I'm here to learn.
Re: one GM brake lever to two external controllers for motor cut-off
« Reply #4 on: April 21, 2011, 05:05:53 PM »
Quote from: krelle52 on April 21, 2011, 04:59:57 PM
There was someone faster than me. :)

ha ha :D.   thanks both. once I have the bits in front of me I know it will be straight forward
Logged
Pages: [1]   Go Up
« previous next »