Reverse on MP Edge

[MrFred]

Although I have not done it, I believe these motors can be made to run in reverse via parameter thru the programming cable. Is there any way to set it up so a switch can be mounted on the handlebar to switch between reverse and forward? This is for a potential cargo trike project.

[Jbwiden]

Yes, you have to short two wires in addition to enabling in software. So you just run those wires up to something on your bars to switch it.

https://youtu.be/BPxOKDIz0_A

[MrFred]

Thanks for the info and link to the video.  I am looking at putting a MP on the single rear wheel of a cargo bike.

Having reverse enabled and at half speed as in the video would be perfect. Does anyone know if that is the default when shipped or do I need to buy a programming cable to set it up?

[Bikemad]

On my MP Edge, reverse is enabled by default and the default speed for reverse is set at 65rpm (forward default speed is 380rpm).

This should give you a speed in reverse of 5~9km/h dependant upon your wheel size. If you wanted to go any faster in reverse you would need either the USB programming lead, Windows PC/laptop and PI800 programming software, or the Bluetooth dongle, a suitable smart phone and the GM App.

Alan

[MrFred]

On my MP Edge, reverse is enabled by default and the default speed for reverse is set at 65rpm (forward default speed is 380rpm).

This should give you a speed in reverse of 5~9km/h dependant upon your wheel size. If you wanted to go any faster in reverse you would need either the USB programming lead, Windows PC/laptop and PI800 programming software, or the Bluetooth dongle, a suitable smart phone and the GM App.

Alan

Thank you for the information.

I have to say that I frequent several e-bike forums and nowhere else have I seen such timely, accurate, and useful responses as I have seen from the moderator of this group.

Thanks again!