-- Solonoid or relay to start the Battery /

[diverdon]

   

       I have been working on the motor wirirng setup
  For the motor .. Wiring in the "Watts Up" Guage to the harness.. Every Time I put the wires together to hook up the motor

       I geta sorta spark in the plug........ like I said a solinoud might be the woy to go .Thanks , Don J.

[Leslie]

People at the sphere recommend a pre-charge bypass resistor allowing some current slowly through to the controller caps before you switch


I just use one of these. .



 Each pole allows 240v 15 amps so I use both centre poles to battery and throw to the controller and on the opposite throw I connect the battery so when I switch off it connects to the charger plug. This has it has never failed me


If I look into the switch really close in the dark I only notice the smallest of sparks. My controller is 40 AMPS.