81
General Discussions / Re: VEC300 with 5kW motor
« Last post by Bikemad on January 17, 2024, 12:16:12 AM »Hi andto the forum.
That throttle should work fine with an output voltage is 0~5V.
The Orange e-lock wire simply requires battery voltage to be applied via a switch to activate the controller, opening the circuit disables the controller.
Reverse is achieved by switching the Reverse wire to ground.
The diagrams below will hopefully help you identify the connections required in order to plan your wiring harness:
Alan
That throttle should work fine with an output voltage is 0~5V.
The Orange e-lock wire simply requires battery voltage to be applied via a switch to activate the controller, opening the circuit disables the controller.
Reverse is achieved by switching the Reverse wire to ground.
The diagrams below will hopefully help you identify the connections required in order to plan your wiring harness:
Alan