Author Topic: Hall sensor fault (5 flashes)  (Read 3661 times)

Offline Electronic nut

  • Confirmed
  • New Member
  • *
  • Posts: 14
Hall sensor fault (5 flashes)
« on: December 30, 2016, 10:30:53 PM »
Hello Alan,  I have not been on for a long time because my motor and controller have been running my house solar system just fine.  However My controller gave me 5 blinks today which says there is a problem with the hall effect in the motor.  Can you please confirm me so I can find out what steps I can take to get this motor back on line.  Thanks.
John

Offline Bikemad

  • Global Moderator
  • Professor
  • PhD. Magic
  • ******
  • Posts: 5,510
Re: Hall sensor fault (5 flashes)
« Reply #1 on: December 31, 2016, 01:02:05 AM »
Can you please confirm me so I can find out what steps I can take to get this motor back on line.

Hi John,

You are already confirmed, and have been since May 07, 2015.  ;)

Have you checked the operation of the Hall sensors like you did in your previous video?

It might also be worth reading your previous thread from your last visit.

Alan