MagicPie 3 Pin thickness on main connector

[Sam.Vanratt]

Hi folks
as I want to put wires into the (female) connector I need to know the thickness (diameter)of the original pins so I do not dilate too much nor have a pins dangling there.
My originals are too deep in the connector to measure them.
Cheers
Sam

[Bikemad]

I have just measured the pins on my MPIII USB program cable and they are 0.92 mm or 0.0365".

On the older MPII cable the pins are much thinner; 0.63mm or 0.0245".

Alan
 

[Sam.Vanratt]

Thanks Alan!
So tomorrow I can buy the fitting goldplated silverwire to finish my second MP3 driven bike (with all the 'pimping' I did to my once defective MP3)
Cheers
Sam