« previous next »
Pages: [1]   Go Down

Author Topic: USB programming cable  (Read 5296 times)

Offline urosv

  • Confirmed
  • Magic Undergrad
  • ***
  • Posts: 51
    • GoldenMotor Slovenia, Croatia
USB programming cable
« on: August 30, 2011, 05:13:11 AM »
Are cables for MagicPie (PL200I) and BAC281P (PL200E)  controller  the same except the external connector? Can i  replace PL200E connector to connect to MP controller ? Does anybody have this information.

Thanks...
Logged

Offline MonkeyMagic

  • Cheeky Chimp
  • Technical Officer
  • PhD. Magic
  • ******
  • Posts: 1,041
Re: USB programming cable
« Reply #1 on: August 30, 2011, 08:56:31 AM »
Yes its the same.

If you have the external cable then you can connect it to the internal controller by following:

[From USB Cable]
Red = 5v+
Black = GND
Green = To cruise on controller
Yellow = To RX on controller

Cheers
Logged
Pages: [1]   Go Up
« previous next »