Magic Pie Wiring Problems - Throttle vsv Cruise Control

[Wolga]

I have cut all my wires between the pie and the external devices (because of shorten the wires, very foolish).

I have soldered the wires without using the connectorsanymore, now I have following situation (problem):

The throttle doesnt work  ,  but if I push the button for cruise control the pie will speeded up.

Whats going wrong - please help me

Wolfgang

Does anybody know how are the wires coloured from the devices TO the connectors ?
I have only a picture from the 8-pins of the pie connector (installation manual).

[DirtyGinge]

The controller not get throttle signal at all, most likely either red or white wire cut......

Search forums for manual, there is section here with all colours that you need

[DirtyGinge]

http://goldenmotor.com/SMF/index.php?topic=2284.0

[Wolga]

Yes you were right, the red-wire (+5V) for the throttle was cut and I had a bad connection.

I found a very good picture, for Pie Wiring (old version pie with 7-used-wires and a grey wire which I didnt found in the new version)

http://www.goldenmotor.ca/Magic_Pie_Wiring_Harness.php

[Bikemad]

Here's the original larger size drawing of the MK I magic Pie Wiring connections:

Gary seems to have shrunk it slightly on his site.

Alan