GoldenMotor.com Forum

General Category => General Discussions => Topic started by: boysen on March 18, 2009, 06:25:15 PM

Title: 36V 500W front wheel kit, hot to wire it
Post by: boysen on March 18, 2009, 06:25:15 PM

I´m new with e-bikes, and would need help how to wire the kit, any clear pictures available? Thanks!

Title: Re: 36V 500W front wheel kit, hot to wire it
Post by: Perbear on March 18, 2009, 10:24:36 PM

There are nice pictures of cabling on the goldenmotor web site for all controllers:
Cruise: http://www.goldenmotor.com/e-Bike-DIY/Cruise%20Controller%20Wiring%20Diagram.pdf (http://www.goldenmotor.com/e-Bike-DIY/Cruise%20Controller%20Wiring%20Diagram.pdf)
Regen: http://www.goldenmotor.com/e-Bike-DIY/BLDC%20Regen%20Controller%20Wiring%20Diagram%200807.pdf (http://www.goldenmotor.com/e-Bike-DIY/BLDC%20Regen%20Controller%20Wiring%20Diagram%200807.pdf)
Standard: http://www.goldenmotor.com/Controller-CAD.pdf (http://www.goldenmotor.com/Controller-CAD.pdf)

Good luck!

Per

Title: Re: 36V 500W front wheel kit, hot to wire it
Post by: boysen on March 19, 2009, 08:04:35 AM

Thank you, I have the wires to motor plugged! I´ve got still three plugs without cable....ie. what should be plugged into the third from left (wire that comes beside the throttle)? And the other two? Hopefully the picture link works.

http://i42.tinypic.com/2u9lv79.jpg (http://i42.tinypic.com/2u9lv79.jpg)(http://i42.tinypic.com/2u9lv79.jpg)

Title: Re: 36V 500W front wheel kit, hot to wire it
Post by: boysen on March 19, 2009, 11:49:32 AM

Quote from: MEB on March 19, 2009, 09:05:43 AM

For the new BAC281 controller the two wires next to the three throttle wires are the reverse button wires.

 :) Now only two to solve....Damn I can´t see the right order from the diagram pictures.

Title: Re: 36V 500W front wheel kit, hot to wire it
Post by: Perbear on March 20, 2009, 10:17:01 PM

Quote from: boysen on March 19, 2009, 11:49:32 AM

:) Now only two to solve....Damn I can´t see the right order from the diagram pictures.

Go to the SECOND page of the cruise controller schematic and zoom in - then you can read the letter coding.

Good luck!

Perbear

Title: Re: 36V 500W front wheel kit, hot to wire it
Post by: Helgeo on March 23, 2009, 11:38:07 AM

Quote from: boysen on March 19, 2009, 08:04:35 AM

Thank you, I have the wires to motor plugged! I´ve got still three plugs without cable....ie. what should be plugged into the third from left (wire that comes beside the throttle)? And the other two? Hopefully the picture link works.

White and black is for the brake sensors. Orange and black is for the cruise control - red button on the unit with red + green button. The green button is for the horn, but that is not pre-wired on the big connector on the controller.