Throttle Wiring

[BillysMagicBikeShanty]

Hi, I’m new to this forum.

I’m trying to use the 3-wire throttle (black, red, white) with the Wuxing 29DX 5-wire connector (black, brown, orange, white, green).

Which wires do I splice together?

I’ll attach photos.

Thanks in advance

[BillysMagicBikeShanty]

Close up photo

[BillysMagicBikeShanty]

I’ve answered my own question.

3 pin Grin / Cycle Analyst throttle wiring
Red:+5vdc
Black: Ground
White: Speed Control Signal (1-4v output)

5 pin Wuxing throttle wiring
Pin 1: White, 5vdc
Pin 2: Green, Speed Control/Throttle Signal (1-4v output)
Pin 3: Black, Ground
Pin 4: Brown, Lighting Feed
Pin 5: Orange, Battery Voltage Indicator

Operational check good 👍

Horay, now I can use my rear shifter again.