Today I had I rather miserable day. When I was riding the bike to work as usual, the MP III started to cut power, only for 2-3 seconds and then running for 4-5 seconds, and then off/on .. Very annoying.
I switched off the ignition, and pedaled to work (15 km)... When I should return from work late afternoon, I switched on ignition key,, but the MP III was totally dead... I checked the wires and everything seemed okay... So I had to pedal back home another 15 km.. and the rain was pouring down
Back home, I put the bike in the cellar so it could dry out. I then disconnected all wires which is connected to the main harness, then reconnected all wires again.. The three led lights lit up on the throttle but there was no response from MP3. (before that I recharged the battery).. I had a spare throttle and connected it to the harness , but no response from MP3.
I also tried to reduce the voltage from 48V to 24 and 36V. Also tried to reduce the current in the programming interface, but none of it worked. I have an org. GM 48V connected to the MP3.
So now I am out of ideas... It could be the controller card I guess... Could the harness itself be faulty? Fortunately, it still under warranty .
/terry