GoldenMotor.com Forum

General Category => General Discussions => Topic started by: bcable on June 27, 2009, 03:16:57 PM

Title: golden motor 48V 20AH LiFePO4 wires
Post by: bcable on June 27, 2009, 03:16:57 PM

I just received my package of stuff from Golden Motors. A few weeks late but it was packed very well and no damage. The main item is a 48V 20AH LiFePO4 battery. It is sealed up nice and fits where I need to mount it. It has 4 wires from the battery and BMS but no wiring diagram. Just being careful I would like to verify that I understand where the wires should go if anyone can verify. It has a heavy red and heavy black which would go to the controller + and -. It has a lighter red and a blue. The lighter red would go to the 2 amp charger + and the blue would go to the charger -. The battery voltage currently measures 52.2V

-- Bill

Title: Re: golden motor 48V 20AH LiFePO4 wires
Post by: Bikemad on June 27, 2009, 05:20:58 PM

Bill,

Nice to see your order arrived OK.

Don't connect the wires until you're sure of the polarity.

You might want to read this thread if you haven't already done so:

 http://goldenmotor.com/SMF/index.php?topic=253.msg2692#msg2692

Alan