GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: Guyblat on December 03, 2015, 09:15:44 PM

Title: mm inside rim width?
Post by: Guyblat on December 03, 2015, 09:15:44 PM

What is the inside RIM width in mm on a MP5 Vector 700c rear hub motor? I'm trying to buy an airless tire from this company and need the measurement for a good fit:

http://www.airlesstiresnow.com/Nu-Teck--Marvel-Compound-City-Tread-Airless-Tire--Options_p_253.html

Also, if you have it, what is the depth in mm?

*See image for illustration

Thanks! Guy

Title: Re: mm inside rim width?
Post by: Bikemad on December 04, 2015, 11:38:01 PM

I have just measured my GM 700c rim and the inside rim width is 18.4mm and the depth at the outer edges is 6.8mm and more like 10 mm to the rim tape at the deepest point in the middle of the cross section.

Alan
 

Title: Re: mm inside rim width?
Post by: Guyblat on December 04, 2015, 11:43:01 PM

Thanks!

Title: Re: mm inside rim width?
Post by: GM Canada on December 05, 2015, 02:22:22 AM

Out Side measurements are still the same as 2010 :)

http://goldenmotor.com/SMF/index.php?topic=2308.msg12759#msg12759

Gary