GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: kobig on December 31, 2014, 07:55:39 AM

Title: Regen not working on NEW BAC controller
Post by: kobig on December 31, 2014, 07:55:39 AM

Hi folks,
I have a 901 kit from 2010, with external controller' still going strong.
My controller got stolen (don't ask).
I got A new external (BAC-281p) controller and wired it.
All works well except for the regen braking that stopped working.
Any ideas ??
Thank's and a Happy new year !

Title: Re: Regen not working on NEW BAC controller
Post by: Bikemad on December 31, 2014, 04:31:33 PM

Hi Kobi, if the brake switches are still causing the motor to cut out when the brake levers are pulled it will probably need the regen brake level adjusting using the USB programming lead and the correct software.

If the motor does not cut out when the brake levers are pulled, you could have a problem with the wiring of the brake switches.

Alan
 

Title: Re: Regen not working on NEW BAC controller
Post by: kobig on December 31, 2014, 05:31:02 PM

 :(
thought as much... the brakes do cut the engine, so I need the 33$ cable.
well...
Lets make it a Happy New Year
ThaNKS alot Alan !!