GoldenMotor.com Forum

General Category => General Discussions => Topic started by: Chris2K on July 19, 2013, 03:03:48 PM

Title: 96V / 10KW
Post by: Chris2K on July 19, 2013, 03:03:48 PM

Hi,

I am about to buy the 10KW/96V motor, but I don't find any datasheet referring to this motor.
All I can find is 48/72/120 V datasheets. I'm intersted in RPM with 96V and the KV-coefficient or the Polepairs ?

Thanks for any help

Chris

Title: Re: 96V / 10KW
Post by: Chris2K on August 27, 2013, 11:43:25 AM

hmm, no answer... So what do I need to adjust running this motor on HPC 300 regarding the Motor Pole pairs ?
At the moment is is 4 but I think this is wrong. The motor is running but I think not that good as it should be.

I hope somebody can helb me with the controller-settings.

Title: Re: 96V / 10KW
Post by: e-lmer on August 27, 2013, 05:37:21 PM

I think this is the data on the 96V motor:
http://www.goldenmotor.com/eCar/HPM96-5000Curve.pdf (http://www.goldenmotor.com/eCar/HPM96-5000Curve.pdf)

The connection diagram is at:
http://www.goldenmotor.com/eBoat/HPM%20Drive%20Kit%20Setup.jpg (http://www.goldenmotor.com/eBoat/HPM%20Drive%20Kit%20Setup.jpg)

I believe that most of their motors are 9 pole 10 magnet (3 pairs), but I have not
found anything to support this.

Title: Re: 96V / 10KW
Post by: Chris2K on August 29, 2013, 08:20:50 AM

Thanks for trying to help. If somebody else has more information, please let me know. I think the motor runs a bit rough and I believe it is a result of the wrong pole pair setting.