GoldenMotor.com Forum

General Category => General Discussions => Topic started by: Rbarciko on June 24, 2013, 06:17:02 AM

Title: BAC-028 controller and horn function
Post by: Rbarciko on June 24, 2013, 06:17:02 AM

What is the voltage output of the Horn connection (A1 and A2) of the BAC-028 controller?
 
I have a 48v MP III system, and the horn works when connected directly to the battery, but not when connected to the external BAC-028 controller (and the horn switch works ok , as does cruise control).
 
(http://rev-electricbikekits.com.au/assets/images/products/FrontLight&Horn.jpg)

(http://the-electric-bike-company-forum.1057686.n5.nabble.com/file/n4619358/cruize_wier_dia_2.jpg)

Title: Re: BAC-028 controller and horn function
Post by: Bikemad on June 24, 2013, 02:26:21 PM

Hi and(https://i.imgur.com/evDSMvT.png)to the forum.

I don't know what voltage is used for the horn connections on the BAC controller, but if the external MPIIIs use the same main harness as the internal ones, the horn/light unit you have shown should connect directly to the blue, yellow, black and red wires coming from the front harness main connector shown at the top of this diagram:

(http://www.arhservices.co.uk/GoldenMotor/LatestMP3wiring.JPG)

I hope this helps.

Alan