GoldenMotor.com Forum

General Category => General Discussions => Topic started by: Just on March 07, 2013, 05:39:54 PM

Title: 60deg vs 120deg sensors configurations -> why both are needed?
Post by: Just on March 07, 2013, 05:39:54 PM

Hi All,

As probably everyone knows, there are two configurations for hall sensors in the motor - 60deg vs 120deg. In both configurations the sensors are placed in the same places with the only difference so that the middle sensor is swapped in the 120deg config. If so then why both the config are needed?

Thank you!