GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: urosv on February 16, 2013, 11:00:30 AM

Title: MP3 controller, circuit question
Post by: urosv on February 16, 2013, 11:00:30 AM

Hi guys...
Does anybody knows detailed description of curcuit areas in MP3. I have 2 dead controllers (2 motors dual drive) and want to analyse and find the reason. It happened on dual drive (One battery and current max 20A for both motors/ 48V 10A max for one motor so the consumption was minimal)

Attaching the pictures of area where I think happened the problem. Any help or advice appreciated !
(http://www.e-motion.si/wp-content/uploads/2013/02/IMG_20130216_101021.jpg)
(http://www.e-motion.si/wp-content/uploads/2013/02/IMG_20130216_101024.jpg)

Title: Re: MP III controller, circuit question
Post by: Bikemad on February 16, 2013, 11:03:45 PM

I have no idea which part of the controller those particular components relate to, but I have enclosed a better picture showing the three diodes (D6, D7 and D8, all marked T4 Y3) and the resistors in between them (2 x 103 and 1 x 202).

I think trying to repair the controllers will probably end up being a complete waste of time, but I wish you luck anyway.

Alan
 

Title: Re: MP III controller, circuit question
Post by: urosv on February 17, 2013, 10:20:46 AM

Thanks for your replay... The question is more into the problem solving in the future than to fix the controller. Any idea on this ?

Title: Re: MP III controller, circuit question
Post by: Kris on March 09, 2013, 01:55:09 AM

Does anybody out there have a 12" smartpie scooter motor with a dead internal controller? If the motor is OK I'd be interested to purchase to explore it's use with an external controller with variable regen