GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: MAGICPIE3FOCUSPOWER on December 03, 2012, 10:14:03 AM

Title: MP3 spacing between stator and rotor?
Post by: MAGICPIE3FOCUSPOWER on December 03, 2012, 10:14:03 AM

Anyone how much mm spacing is between rotor and stator?

I would like to know because, maybe I want to paint it.

Title: Re: MP III spacing between stator and rotor?
Post by: N43122 on December 04, 2012, 01:31:36 AM

It's not much.  About 1.0mm, but what exactly does this have to do with painting the motor?  The rotor/stator gap is inside the motor.

Title: Re: MP III spacing between stator and rotor?
Post by: MAGICPIE3FOCUSPOWER on December 04, 2012, 07:39:11 PM

Thanks.
I want to paint the rotor and stator>>>>>rust......

Title: Re: MP III spacing between stator and rotor?
Post by: N43122 on December 04, 2012, 09:51:15 PM

ohhh... ok.  That makes sense. plenty of room between them for paint.  The paint will add less than .010".  Go for it. I'd recommend an appliance epoxy paint.

Title: Re: MP III spacing between stator and rotor?
Post by: MAGICPIE3FOCUSPOWER on December 04, 2012, 11:19:49 PM

Thanks I will use urethane paint because I have laying around here.

Title: Re: MP III spacing between stator and rotor?
Post by: MAGICPIE3FOCUSPOWER on December 25, 2012, 02:28:30 PM

Well I have painted the rotor and stator.

But with the play of this motor, it's shaving.

So I have removed all painted area of the rotor.
And repainted with normal gray primer, it's much thinner.

Also for best resusts just baked the rotor and stator in the oven at 50 celcius.