GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: atcspaul on September 25, 2012, 12:20:25 PM

Title: programing motor
Post by: atcspaul on September 25, 2012, 12:20:25 PM

this is in the general area http://goldenmotor.com/SMF/index.php?topic=2072.0 could a mod move it here or someone please take a look and answer. its about the programming of the Magic Pie motor. thank you in advance

Title: Re: programing motor
Post by: Bikemad on September 25, 2012, 03:30:16 PM

The reason it has not been posted in the Magic Pie Section is because is it not specific to Magic Pies, as the same software is used for programming several controllers used with GM hub motors, including the following:

• Geared mini motors
• HBS direct drive motors
• All MPIIs
• All MPIIIs
• Smart Pies

There are three different programming cables for controllers that use this software:

• PI-200I for MPIIs with internal controllers
• PI-200E for mini motors, HBS range, MPIIs and MPIIIs using the external cruise controllers
• PI-300I For MPIIIs and Smart Pies with internal controllers

Alan
 

Title: Re: programing motor
Post by: atcspaul on September 25, 2012, 10:12:34 PM

thank you alan. I really apreciate your help.  :D