GoldenMotor.com Forum

General Category => General Discussions => Topic started by: GoldenWonder on October 26, 2011, 07:03:03 PM

Title: HELP - Purchased the MW-16C Highpower 2k-3k watts motor need controller
Post by: GoldenWonder on October 26, 2011, 07:03:03 PM

Hello everyone,

I purchased the following from Golden Motor China:

Model: MW16C -- High Power Motor (Brushless/Gearless)
Voltage:48V
Power Rate:2000W-3000W
Weight: 9.5Kgs

What controller will work for this?????

Greatly appreciated!

ray

Title: Re: HELP - Purchased the MW-16C Highpower 2k-3k watts motor need controller
Post by: Bikemad on October 27, 2011, 12:14:35 AM

Hi Ray and(https://i.imgur.com/evDSMvT.png)to the forum.

Erik used the HPC100B controller on his MW16C when he carried out his scooter conversion (http://goldenmotor.com/SMF/index.php?topic=1669.msg8365#msg8365) but I think that controller has since been superseded by the HPC300A (visit the GM Website (http://www.goldenmotor.com) for more details).

(http://www.goldenmotor.com/HPM300A500A.jpg)

If you decide to purchase an HPC300A, be very careful with the wiring, as there are discrepancies with some of the wiring diagrams which has cause some real problems recently.

I suggest you choose a controller that can withstand at least 150Amps, as Erik's motor consumed 135Amps @ 60V under acceleration! :o

Alan