GoldenMotor.com Forum
General Category => General Discussions => Topic started by: Serg1337 on September 24, 2011, 08:49:41 PM
-
Hello people of the electrical motorbike world.
Yesterday iv discovered that the charger that came with my battery is not functioning properly. I plugged it into the wall last night (not yet to the battery), and the charging light was green, when usually red. Could someone help me out with this issue?
-
Just checking, is this the charger that says something like do not connect to power without first connecting battery on the case?
-
no it does not say that.
-
The Charger will be green until the battery is connected (or already connected) then it should change to Red once a charge load occurs.
When the battery reaches the charger output voltage (eg. 54.6v) for 48v GM battery, then the light will change from red to green indicating full charge.
-
when I plug it in, it stays green! it does not switch to red.
:(
-
The charger connector inside battery could be loose. Check that first.
-
Is it a 48V charger? If so is the red voltage switch set to 115 or 230 volts. It has to be correct to work properly.
Gary
(https://arhservices.co.uk/GoldenMotorCanada/ChargerSwitch016.jpg)
-
it is a 36V charger. I will take it apart, and take some pictures. It would be nice if I could talk to someone as I do that. If not, I will take it apart and take some pictures and see what you all have to say!