GoldenMotor.com Forum

General Category => General Discussions => Topic started by: MagneticMotorE on August 25, 2011, 07:50:29 AM

Title: Where Do I Get USB Battery Cables?
Post by: MagneticMotorE on August 25, 2011, 07:50:29 AM

Where Do I Get USB Battery Cables?

Title: Re: Where Do I Get USB Battery Cables?
Post by: Bikemad on August 25, 2011, 11:49:48 AM

I'm not sure whether you mean the USB interface cable for programming the controller or the actual battery cable itself.

(http://goldenmotor.com/e-Bike-DIY/CruiseControllerProgrammingInterface-PI200.jpg)
Two usb interface cables are available on the GM Website (http://goldenmotor.com/frame-controllers.htm), one for the internal controller and one for the external ones.
I expect many of the GM dealers (http://www.goldenmotor.com/contact/dealerhtml.php) will also stock these cables, but you would need to check with your local dealer to make sure.

GM batteries are usually supplied with a battery lead, which has the correct plug to suit the battery outlet socket.

Alan
 

Title: Re: Where Do I Get USB Battery Cables?
Post by: MagneticMotorE on August 25, 2011, 05:48:20 PM

whats the difference? so it's one for interfacing/computer and another for charging?

I have external controller just to let you know

Title: Re: Where Do I Get USB Battery Cables?
Post by: DirtyGinge on August 25, 2011, 08:55:07 PM

one is for the internal controller, ( black only) one is for the external controller ( with white block on end)

Title: Re: Where Do I Get USB Battery Cables?
Post by: MonkeyMagic on August 26, 2011, 05:12:15 PM

Quote from: MagneticMotorE on August 25, 2011, 05:48:20 PM

whats the difference? so it's one for interfacing/computer and another for charging?

I have external controller just to let you know

Yes if your battery pack is 2xAA batteries then you can use it to charge ;) hehe

Title: Re: Where Do I Get USB Battery Cables?
Post by: Sangesf on August 26, 2011, 05:47:12 PM

Quote from: MagneticMotorE on August 25, 2011, 05:48:20 PM

whats the difference? so it's one for interfacing/computer and another for charging?

I have external controller just to let you know

The USB cables are for programming the V2 external "magic controllers" and Magic pie (internal) controllers..
NEITHER of the USB cables are used for charging.