GoldenMotor.com Forum

General Category => Magic Pie & Smart Pie Discussions => Topic started by: stkal on May 18, 2011, 05:12:34 PM

Title: USB Programing Cable for Internal Magic Controller
Post by: stkal on May 18, 2011, 05:12:34 PM

hi to all! im interesting in buying the cable. I want to increase top speed from the pc settings via the program. I want to know what is possible to do by buying this cable. im from greece and here there are no people who have the experience to explain it to me. so I want to know with cable what I can do. thanks

Title: Re: USB Programing Cable for Internal Magic Controller
Post by: Pwd on May 18, 2011, 05:23:49 PM

Chances are your top speed is already being reached, I'll get you a screen-shot of the software.

EDIT: Actually, just take a look at this thread, it should help I hope:
http://goldenmotor.com/SMF/index.php?topic=1916.0

Title: Re: USB Programing Cable for Internal Magic Controller
Post by: stkal on May 18, 2011, 06:00:29 PM

i read the above topic and I think it doesn't answer my question. I have seen the picture taken from the program and I want to know which are the default settings of my Magic Pie 48v/12ah bike and which I have to change. would I see any difference in performance? otherwise I don't have to buy the cable.
or we buy the cable only if we have bought a battery greater then 48v/12ah???? these are my questions. ihope ypou understand me because my english is not well. thanks again

Title: Re: USB Programing Cable for Internal Magic Controller
Post by: DirtyGinge on May 18, 2011, 06:44:20 PM

Hi

Only increasing voltage help you to get more speed...48V12ah > 60V12ah, but the magic controller NOT SUPPORT THIS VOLTAGE

usb cable help you change regen braking power, or make less power for greek law

48V speed maximum is about 25 MPH

Hope this helps :d

Title: Re: USB Programing Cable for Internal Magic Controller
Post by: stkal on May 18, 2011, 07:17:13 PM

thanks man! your answer is very helpfull.