GoldenMotor.com Forum

General Category => General Discussions => Topic started by: jpgey on April 26, 2011, 02:24:02 PM

Title: Controller with sensorless motor
Post by: jpgey on April 26, 2011, 02:24:02 PM

Hello, does the Cruise Controller (programmable) 48V/50A Item Code: BAC-0282P is working with sensorless motors ?
I think yes but will it be detected as a failure ?
Many thank's
JP

Title: Re: Controller with sensorless motor
Post by: jpgey on April 26, 2011, 02:29:00 PM

Ok I find the user guide:

2. How to work with motor hall-sensor malfunctions:
The controller will detect motor hall-sensor failure and make 2 beeps of sound, and then it automatically
enters into sensorless control mode. Turn the throttle to run the motor. You may need to push/pedal the
ebike or vehicle a bit in case the motor does not move from stall (This is sensorless control limitation, but
happens seldom).

Title: Re: Controller with sensorless motor
Post by: DirtyGinge on April 26, 2011, 08:05:35 PM

ive run the controller in sensorless mode with no problems...you may need to pedal from start but otherwise all was fine all the time