GoldenMotor.com Forum

General Category => General Discussions => Topic started by: glenn on July 29, 2008, 10:31:05 PM

Title: 48v regen braking controller
Post by: glenn on July 29, 2008, 10:31:05 PM

I hooked up the 48v regen controller to an 800w hub motor on a big skate board and it works great.  12 miles at 20mph on hilly terrain.

How do I change the cutoffs?  If I accelerate to hard it cuts out.

It says you can adjust settings with a usb connector but I have no documentation...

Title: Re: 48v regen braking controller
Post by: biohazardman on July 30, 2008, 05:21:41 AM

The usual problem with cut out is the batteries cannot keep up with the current draw of the motor load.   I read in an earlier thread that a programming box will be out soon for these controllers expect that is the USB you speak of.