GoldenMotor.com Forum
General Category => General Discussions => Topic started by: steveo on August 25, 2010, 06:50:34 PM
-
Hey Everyone,
I was wondering if anyone had photos of the inside of this motor?
i'm looking to find out the width of the motor stator & also the motor magnets.
thanks
-steveo
-
I think Leslie has a few pics of a toasted one! ;D
-
who is leslie on the forum?
-
who is leslie on the forum?
Smee.
If you stand on your head and read my screeny.
317537.
(http://i29.photobucket.com/albums/c251/soulelectronique/rotor.jpg)
This is a starter. I have much better pics I can give you I just need some more time to dig them up.
-
who is leslie on the forum?
Smee.
If you stand on your head and read my screeny.
317537.
(http://i29.photobucket.com/albums/c251/soulelectronique/rotor.jpg)
This is a starter. I have much better pics I can give you I just need some more time to dig them up.
haha
...
sorry ... flew right over my head..
any other photo of the width of the stator & the magnets is what i'd like to see, thanks for the pics
thanks
-steve
-
Here ya is this good enough.
Its of a HBS 36v 750watt though. I think they are the same except the HBS48 1000 has shorter thicker windings.
(http://goldenmotor.com/SMF/index.php?action=dlattach;topic=2432.0;attach=3165;image)
(http://goldenmotor.com/SMF/index.php?action=dlattach;topic=2432.0;attach=3163;image)
They are very close to 23mm. Id say 2.75mm.
I cant find vernia. :(
-
Here ya is this good enough.
Its of a HBS 36v 750watt though. I think they are the same except the HBS48 1000 has shorter thicker windings.
(http://goldenmotor.com/SMF/index.php?action=dlattach;topic=2432.0;attach=3165;image)
(http://goldenmotor.com/SMF/index.php?action=dlattach;topic=2432.0;attach=3163;image)
They are very close to 23mm. Id say 2.75mm.
I cant find vernia. :(
thanks for the quick response..
i spoke with one of the golden motor reps... they advised me that the motor casing is wider on the 1000w vs the 750w & 500w hub casings are the same width... is that true?
P.s. i'm steveo on the es forums :P... I noticed your on the es too :)
thanks
-steveo
-
Ahhh so they are different.
Yea sorry. I assumed the diff between the 1000 watt HBS48v and the HBS36v 750 watt was just the voltages. Ah well you learn something new every day.
Shame they couldnt give you a width on the magnets and stator hey.
Hi Steveo. Yes I know you.
The ebike repairman from Canada. ;D
I can do your spam for you mate, it's all good.
http://endless-sphere.com/forums/viewtopic.php?f=9&t=12784 (http://endless-sphere.com/forums/viewtopic.php?f=9&t=12784)
Steveo from Ontario Canada does the following repairs to Ebikes. Highly recommneded!.
-Ebike controller repairs/modifys
-Hub motor Repairs/modifying
-Hall sensor Repairs
-Building Bms Boards (gary bms Specifically, I've build 3 of them to date)
-Garys bms board Repairing, yes I repair these!!!
-Hub motor rim spoking/truing
-Battery pack building/modifying
-Battery testing by internal resistance/mah
-Car amplifier repairs
-Car Deck Repairs
-Dc Brush motor/repairs/modifying
Good work BTW. The world needs more Ebike repairmen doing exactly what you are doing..
Are you any where near Gary Salo. I note you say Gary there in your advert at ES. He could do with some help, we all could here.
Cheers. 8)
-
email to me,tom@goldenmotor.com
I can give you drawing.
-
Why can you not put pictures on here ?
You do not want customers to know funny ! ???
-
Hey thai mate don't go stabbing around in the dark!
There are somethings to consider here:
1. Its probably a SolidWorks 3d drawing that would contain all of the measurements, and would
a) Exceed the 1Mb attachment filesize
b) May not be an accepted file format on the forum
c) Is subject to change and manufacturers complete drawing specs I don't think any company would want to give to the public
2. Customers can know, as stated to email for a drawing
Sorry I'm not trying to upset anything here but hey this is not an opinion topic, its a request for detailed measurements true
peace
-
i asked for PHOTO'S !
not solid works drawing .......duuuurrrrrrrrrrrrrrr I think they are not the same !
:o :o :o :o
-
email to me,tom@goldenmotor.com
I can give you drawing.
i asked for PHOTO'S !
not solid works drawing .......duuuurrrrrrrrrrrrrrr I think they are not the same !
:o :o :o :o
You two are on a different wave length. He says drawing you say photos.
He says tomatoes you says tomaytoes. Anything you can do I can do better da da dum di doo. Honestly the TOM is here trying to make some ground give him a chance Alien. Please.
-
Thanks exactly what I was getting at, plus the solidworks drawing would be sooooo much better!
We need to take Tom out for a few beers poor bloke, I've probably had 3 vacations to his none...
Lol and I think this is steveo post there alien you big topic hog ;)
peace
-
Thanks exactly what I was getting at, plus the solidworks drawing would be sooooo much better!
We need to take Tom out for a few beers poor bloke, I've probably had 3 vacations to his none...
Lol and I think this is steveo post there alien you big topic hog ;)
peace
i agree with you 100% BUT when some customers OK have motors !!! photo's are actual ! not computor designed ! YOU CAN THEN COMPARE !!! :o :o :o OH LOOK NOT THE SAME !
i live in ASIA they are CAMERAHOLICKS HERE ! ;D ;D ;D
-
Oh of course sorry
I totally forgot photos were 3d and you could measure depth, width and diameter. How silly of me!
Thanks champ
-
Thanks exactly what I was getting at, plus the solidworks drawing would be sooooo much better!
We need to take Tom out for a few beers poor bloke, I've probably had 3 vacations to his none...
Lol and I think this is steveo post there alien you big topic hog ;)
peace
i agree with you 100% BUT when some customers OK have motors !!! photo's are actual ! not computor designed ! YOU CAN THEN COMPARE !!! :o :o :o OH LOOK NOT THE SAME !
i live in ASIA they are CAMERAHOLICKS HERE ! ;D ;D ;D
Um the OP wanted measurements not photos. I tried to give both. The tech drawings are fine IMO.