GoldenMotor.com Forum

General Category => General Discussions => Topic started by: feltzbar on August 14, 2010, 01:43:41 PM

Title: What to get in a kit
Post by: feltzbar on August 14, 2010, 01:43:41 PM

I am looking to get a front wheel 500W 36V, kit with the 36v12Ah battery.  I want to keep the kit pretty simple, but I am not sure what all parts I need. can anyone give me some advice?

Title: Re: What to get in a kit
Post by: GM Canada on August 14, 2010, 02:38:07 PM

Hi there, ill keep it simple for you:

36v500w motorized wheel
2 button control switch - horn and cruise
thumb or twist throttle - power to go
power brake levers - cut motor when braking and enable regen

also recomend a torque arm for front wheel installation

Gary

Title: Re: What to get in a kit
Post by: feltzbar on August 14, 2010, 09:41:14 PM

is there a simple kit with just that stuff in it or would I have to go through the build your own kit thing.  I was looking at the build your own kit page and I didn't know what some of the options were or if they were important.

Title: Re: What to get in a kit
Post by: karen on August 14, 2010, 10:25:29 PM

I used the goldenmotor.ca site to check, liked that it looked easier to find what I needed.

I also recommend better brakes than I had, depending on what your bike has. So diskbrakes and diskbrake activator.

Since I had some trouble with looking for some wireing issues I also recommend an extra Wiring harness and Connectors(Item Code: ACC-011) since I think it might have been easier to change the whole harness then fixing it. Then I also have to say that Im not good at fixing these electrical thing. And its a long wait to get it later

The wire for connecting to the controller iff you like to tamper with it.

Title: Re: What to get in a kit
Post by: karen on August 14, 2010, 10:26:53 PM

I cant find torque arms on site? -make them myself?

Title: Re: What to get in a kit
Post by: Sundsvall on August 14, 2010, 10:57:44 PM

I’ll suggest that you order from goldenmotor.ca. If you have any questions Gary is present here at the forum and he seems to be very customer friendly.

Peter

Title: Re: What to get in a kit
Post by: GM Canada on August 15, 2010, 11:54:09 AM

Quote from: karen on August 14, 2010, 10:26:53 PM

I cant find torque arms on site? -make them myself?

Hi Karen, feltzbar

I don't normally like to solicit sales in the forum, I like to come here and read, learn and help out if possible. But it seems sometimes everyone knows more then I do!

Anyway, I have them on my site at

Torque Arm
http://www.goldenmotor.ca/shopping/pgm-more_information.php?id=110&=SID#MOREINFO

These are not GM products, but I do sell them as they are the best I can find.

Custom Kit I put together for another customer that seems to have had the same needs as you.

http://www.goldenmotor.ca/shopping/pgm-more_information.php?id=135&=SID#MOREINFO

Again my apoligies for putting these links in the forum.

Gary

Title: Re: What to get in a kit
Post by: karen on August 15, 2010, 02:18:12 PM

Thanks, Gary:) Have to wait for the twelft next month since I used my paycheck to order kits from China, but I put them in my favorites. Couldnt find it in Europe, but Ill check it out:)

I had a horn on the JoyEbike I have and when I asked Tom he could send them also, even they arent on the website.

Then again I stick my nose in everything:)