GoldenMotor.com Forum

General Category => General Discussions => Topic started by: Electrobent on March 16, 2010, 11:45:27 PM

Title: Wheel locking feature?
Post by: Electrobent on March 16, 2010, 11:45:27 PM

How does one "lock" a cruise controller?

Title: Re: Wheel locking feature?
Post by: Bikemad on March 17, 2010, 12:03:03 AM

Eric,

If I remember right, the battery has to be left connected and turned on and you need to have a switch fitted into the red lead going to the "G" or "Lock" connection on the controller. You operate the switch to break the circuit and then press the cruise control button within 10 seconds and you should hear a beep. Movement of the wheel should activate the alarm and trigger the wheel locking function.

I'm sure there are some posts on the forum somewhere regarding the wiring.

Alan
 

Title: Re: Wheel locking feature?
Post by: Electrobent on March 17, 2010, 05:27:45 AM

I wondered what that extra wire was for!

thanks Alan