GoldenMotor.com Forum
General Category => General Discussions => Topic started by: Mbra on June 29, 2009, 06:58:05 PM
-
I have Wilderness Energy Brushless 36 volt, 600 watt Hub Motor I want to know if I can change for the new
48V/50A Cruise Speed Controller thank you.
-
You would have to contact Wilderness Energy to get the
actual max wattage for that motor.
I suspect that you risk burning out the motor by putting the
higher voltage controller on it.
Wattage is (basically) voltage times Amperage.
600W/36V is just under 17Amps continuous.
The 48V controller is 1000W, (About 20Amps continuous)