GoldenMotor.com Forum
General Category => Magic Pie & Smart Pie Discussions => Topic started by: Mancuz28 on November 23, 2020, 09:24:47 PM
-
I have an MP4 with programming cable, which has been great for me for many years now. I am now thinking of getting a new Smart Pie 5, or possible Edge for my son so we can be a GM family :D
Could anyone tell me if the MP4 programming cable will work with the Smart Pie 5 internal controller, and/or the Edge, or would I need a new one? (I can do a little manual re-wiring myself it that's possible...)
I am also thinking about Smart Pie External controller...but I am assuming that has a very different programming cable? I couldn't find a picture of that one.
Thanks!
-
The SP4, SP5, MP4, MP5 and MP Edge equipped with vector controllers all use the same PI-405 programming cable:
(https://goldenmotor.bike/wp-content/uploads/2019/12/mp5-usb.png) (https://goldenmotor.bike/product/usb-programming-cable-for-magic-pie-vector-and-smart-pie-vector-controllers/)
The SP5, MP5 and MP Edge can also be programmed using the Bluetooth dongle and a suitable phone.
The programming cable for the Smart Pie External will depend upon which controller you use.
If you use the BAC-281P controller:
(https://www.goldenmotor.com/img/Cruise-BLDC-Controller.jpg) (https://goldenmotor.bike/product/magic-controller-v2-25-amp/)
You would need to use the PI-200E programming lead:
(https://goldenmotor.bike/wp-content/uploads/2019/12/external-usb-cable.png) (https://goldenmotor.bike/product/usb-cable-for-external-magic-controller/)
Click on pictures for more information.
Alan
-
Thank you! Just the information I was looking for.