GoldenMotor.com Forum

General Category => General Discussions => Topic started by: Benarif on August 03, 2020, 02:50:27 PM

Title: Incorrect software
Post by: Benarif on August 03, 2020, 02:50:27 PM

Hi Allan,
i am el-motorizing my boot. so I receive 2pc.  3kW BLDC- motors with the 48V240A VEC controller.
on PC , sw LBMC GUI V3.1.3 , it get the message "controller version incorrect. :-[

also the 16 blink when connectet are visible. the trottle potential from 1.2V and more works normal (2k and 1,5k resistors connectet) with the branched motor.
where I kan find the mached sw?
thanks and greetings from Swiss
sorry for my bad English...

Title: Re: Incorrect software
Post by: Bikemad on August 03, 2020, 11:13:59 PM

Hi and(https://i.imgur.com/evDSMvT.png)to the forum.

You can download the latest version 3.3.0 from here (https://www.goldenmotor.com/controllers/PI-800.rar).

Hopefully this will work correctly.

Alan
 

Title: Re: Incorrect software
Post by: Benarif on August 04, 2020, 01:25:23 PM

Hi Alan,
much thanks for the Link, the SW is working and also readabel.
 
Greetings Peter

Title: Controller for USB
Post by: Benarif on February 22, 2021, 10:57:00 AM

Hi Alan,
for visualisation , I saw a clear-view display (LCD-Screen).
Do You have an adress for some models for 3kW motor?
Or a software for USB-contactor on the Controller Vec240, 48Volt ?
- Beware of the Virus and greetings from my boot
Peter