GoldenMotor.com Forum
General Category => Magic Pie & Smart Pie Discussions => Topic started by: diverdon on January 01, 2010, 01:09:21 AM
-
Hello all ,
Please could someone tell me how to hook up the switch for the headlight and tailight??
I really have searched a lot here for it before bugging anyone as you'd thinkit would be an easy thing to find .
I see the Plug marked "Led Headlight" and also have found the 2 wires from the headlight switch button..
The thing is I do not know how to make the whole setup work . Cannot find my original install instructions any more and haven't ordered a headlight /tailite set yet which might have the instructions also.
Sure hope someone can explain how this works.. Thanks So Much . Don J.
-
Please could someone tell me how to hook up the switch for the headlight and tailight??
I see the Plug marked "Led Headlight" and also have found the 2 wires from the headlight switch button..
Sure hope someone can explain how this works.
Here you go Don, this diagram should be self-explanatory:
(http://goldenmotor.com/SMF/index.php?action=dlattach;topic=1457.0;attach=1302;image)
With the Magic Pie, you must connect the + and - to the Red and Black wires on two pin "LED Lights" connector as shown in the diagram below instead of the A & B controller connections shown in the diagram above.
(https://goldenmotor.com/SMF/index.php?action=dlattach;topic=1635.0;attach=1485;image)
The 1 Amp inline fuse shown in the diagram is optional and is not supplied with the lights, but I suggest you play safe and fit one, as it will protect the switch and main wiring harness if the lighting cables become trapped and cause a short circuit.
An inline fuse & holder should be easy enough to get hold of, as most car accessory stores will usually stock them.
Alan
EDIT: Additional diagram added to avoid any confusion.
-
Thanks for the Reply ... At first I did not understand it ..... But now I think I understand . The easiest way to explain it is to say that the plug in the wiring harness becomes the 2 poles in the speed controller on the other Diagraham .. Right ? .... Thanks again ,
Now all I need to do is wait for someone in the USA to have it in stock so I won't have to pay $30 shipping which doubles the price of the lights ..
Happy New Year , Don J.
-
The easiest way to explain it is to say that the plug in the wiring harness becomes the 2 poles in the speed controller on the other Diagram .. Right ?
Don,
As long as you can understand it, that's all that really matters.
Alan
-
Hello Alan,
What a Great Graphic ... That makes it wayyyy easier to understand ... Thanks for the ... Uhh Picture .. I hope it helps others too ..
Thanks Again Alan , Don J.