GoldenMotor.com Forum

General Category => General Discussions => Topic started by: greatbigwave on April 01, 2008, 08:59:13 PM

Title: Rim issues
Post by: greatbigwave on April 01, 2008, 08:59:13 PM

I have a golden motor front wheel hub motor purchased from Amped bikes.  Motor and everything works fine, but the sidewall of the rim is not flat all the way around, making it impossible to properly adjust the brakes.  I would like to put the motor in a different rim, and wonder if people have experience with this.  What size spokes do I need, and what is a good model rim to put it in.

Thanks in advance,

GBW

Title: Re: Rim issues
Post by: johnbear on April 02, 2008, 02:08:45 AM

You can use the same spokes and lace it to a Alex dm18 double walled rim.