General Category > User Guides/Catalog

P.A.S. Installation

<< < (2/2)

Just:
Thank you!

Wombat:
Finding anything that makes sense and up-to-date regarding the pedelec system is difficult but once again your info Alan goes a long way to helping.

Although a little late for this thread perhaps I would like to mention...

The magnet ring I recently received (Oct '13) includes stamped rotation direction arrows which should help with above queries.

PS for many of us pedelec laws are here to stay.

Regards.

GM Canada:
Does the pedelec need the ring or can you remove it from the ring and just use the sensor?

Gary

Bikemad:
The metal ring is purely a mounting bracket for the sensor unit, so it should be able to use another form of mounting for the sensor, but you will need to make sure it still faces the right direction and lines up with the magnets in the plastic magnet ring.

If you were referring the plastic magnet ring, you may also be able to remove the magnets and bond them directly to the chainwheel using the plastic ring to get the spacing correct, but be very careful to keep them facing the right way too as the polarity of the magnets is important.

Alan

Navigation

[0] Message Index

[*] Previous page