General Category > User Guides/Catalog

LED light connection?

(1/2) > >>

titanas1:
I just got a 36v 500w kit with the 36v16ah battery with LED light.
Please, tell me if the LED light connection in the pdf plan is correct

Bikemad:
Hi Titanus1

The connections to the light unit are the wrong way around. ???
The Black -ve lead should be at the rear of the light and the Red +ve lead should be at the front. (See this post)
It would be better to have the switch on the +ve side of the lamp, as the lamp mounting bracket is connected to ground!
This will ensure the lamp does not remain on (with the light switch turned off), as it will if your battery is also grounded.
I would recommend using a small inline fuse (1Amp or less) for the lighting circuit, where it connects to the +ve supply.

The cable route should be something like this:
[Battery/Speed controller +ve]->Red cable->
[Fuse]->Brown cable->
[Switch]->Yellow cable->
[Soldered joint]->Red cable to front connection on headlamp->
[Lamp]->Black cable from rear of headlamp->
[Battery/Speed controller -ve]

I'll try to post a better circuit diagram for the lighting when I get some spare time.

Alan
 

titanas1:
Now you totally lost me.!!!!!!
Please,
send me the right LED connection diagram.

Hardcore:
http://goldenmotor.com/SMF/index.php?topic=1310.0

maybe this helps

Bikemad:

--- Quote from: titanas1 on November 05, 2009, 11:49:35 AM ---Now you totally lost me.!!!!!!
Please,
send me the right LED connection diagram.

--- End quote ---

This should be easier to understand:



And use this diagram if you're using the LED lights with a Magic Pie kit:



Alan
 

Navigation

[0] Message Index

[#] Next page