GoldenMotor.com Forum
General Category => General Discussions => Topic started by: Tbnrider on November 12, 2017, 05:12:44 PM
-
What programmable controller is supplied with the Black Magic motor and conversion kit?
Where can I find a drawing, dimensions and wiring diagram for this controller?
tbnrider
-
Hi Roy,
The controller that used to be supplied with the Black Magic motor was typically the external Magic Cruise controller:
(https://www.goldenmotor.ca/product_images/t/387/MAGIC_CONTROLLER__68304__82761__23396_zoom.jpg) (https://www.goldenmotor.ca/products/Magic-Controller-V2--25-AMP.html)
The wiring diagram and dimensions for the above controller can be found in this PDF document (https://www.goldenmotor.com/e-Bike-DIY/Cruise%20Controller%20Wiring%20Diagram.pdf).
I don't know whether the horn shown above is included in the kit or whether it is an optional extra.
I recommend that you ask your supplier about the supplied controller (and the horn) just in case the Black Magic kits are now supplied with a different controller. ;)
Alan
-
Thanks very much Alan
The BAC-028X controller pictured was supplied with a Pro 902 conversion kit currently installed on my recumbent bike. I am now upgrading to a Black Magic kit and was wondering if the controller was going to be different. Apparently the controller to be supplied is set up to different power settings and now bears a different part number but the packaging and wiring is identical, which was my main concern about the mounting configuration on the bike. But it looks like I can use my existing mounting for the Black Magic system.
Thanks again....Roy