GoldenMotor.com Forum

General Category => General Discussions => Topic started by: e-lmer on January 25, 2024, 05:21:42 PM

Title: Non-Magic with BAC028 controller Connector issue
Post by: e-lmer on January 25, 2024, 05:21:42 PM

I have one of the original golden motor wheels and upgraded to the first generation BAC Controllers
with Molex connectors and Chinese labeling.  I then upgraded to the newer BAC controller, but the wiring is different on
the 12 pin connector.

The wheel came with 2 and 3 connectors going to a 12 pin white molex style connector.   
(Like a PC power harness)

The new controller came with multi-color JST style locking connectors.
Where can I source the male version of the JST style wire to wire connectors?

Thanks for the advice.