PI200 Controller program for Magic Pie & Cruise Controler

General Category > Reviews

(1/2) > >>

Who42:
ELECTRIC BIKE NUT
;D PI200 Controller program for Magic Pie & Cruise Controler
This Programer may help any one remap there Controller
:) What a great Idear thanks Golden Motor
Magic Pie & Cruise Controler what are the factory settings???
PI200 Controller program what are the factory settings???
901 24v 36v 48v
902 24v 36v 48v
Magic Pie 24v 36v 48v

What are the factory settings??? for 902 24v 36v 48v and Magic Pie 24v 36v 48v

Max Current ? A: Max Continuous Current setting. IS SET AT MAX
Max Peak Current ? A: Max Peak Current setting. IS SET AT MAX

Motor Type 120 / 60 ? A:120 A: BLDC

Pas Low Med High ? A: Set Pedel assist

Motor Voltage 24v 36v 48v ?
Can any Cruise Controler voltage be reprogramed to any voltage? A: Yes

Max Speed? A: Set max Speed Forward.

Rev Speed? A: Set max Speed Reverse.

Immed / Unimmed ? What dose this mean A: Immed: allows reverse to be selected Immediately.
Unimm: will only allow reverse to be selected after the motor has stopped. and is A:SET AT IMMED

Regen Brake ? A: Set Regerative braking percentage. IS SET AT MAX

Thiis is a great programe 8) Especially if you want to change voltages :D

The interface screen and leads are very easy to use and worked with XP and Vista NP ;)
just plug in the interface lead from either Magic Pie or Cruise Controler and connect the other end to you PC via USB port. Nothing else needs to be pluged in ??? Now you can change all the setting to suit your self and save them to the controler or to file :o

PI200 Controller program
Download Parameter Setting Software for PC Windows XP(PI200Setup.zip, 184KB)
LINK: http://www.goldenmotor.com/e-Bike-DIY/PI200Setup.zip

rostac:
What is price model PI-200I

Leslie:
I believe the whole setup including delivery is around $50.

You are paying for the software too but that's is considered free. I do feel the price will go down once the programming has matured and the sale of these have proven cost effective for its development.

There has some confusion over the small expensive USB wire that magically connects to the controller.

I see the value in all this.

Rrominet:
Hello,

Has someone sources of the PI200Setup.exe program ?

It could be interresting to correct the "Store/Save" button which saves a max continuous/peak A to 15A or 16A, unless the "Factory Settings" button which saves more than 25A peak whithout problems.

Thanks for your help,

csm:

--- Quote from: Who42 on April 14, 2010, 11:54:04 AM ---
Magic Pie 24v 36v 48v
Motor Voltage 24v 36v 48v ?
Can any Cruise Controler voltage be reprogramed to any voltage? A: Yes
Thiis is a great programe 8) Especially if you want to change voltages :D
PI200 Controller program
Download Parameter Setting Software for PC Windows XP(PI200Setup.zip, 184KB)
LINK: http://www.goldenmotor.com/e-Bike-DIY/PI200Setup.zip

--- End quote ---

What is the effect of setting the voltage to 24v, 36v, or 48v? If it is set to 24v and you connect a 36v battery or 48v battery to it, what would happen? If you set it to 48v and connected a 36v or 24v battery to it, what would happen?? Would the motor or controller work? Would they get damaged? Would it affect performance of the motor/controller??

Navigation

[0] Message Index

[#] Next page

Go to full version