GoldenMotor.com Forum
General Category => User Guides/Catalog => Topic started by: Pawel on October 19, 2016, 09:26:01 PM
-
Hi!
Do you have programming guide for HPC500H Motor Controller?
What is the proper configuration for 96V motors?
-
Unfortunately there are no specific instructions for using the programming software, the information regarding the HPC controllers can be found in the Controller User Guide (http://www.goldenmotor.com/HPC%20Series%20Controller%20User%20Guide.pdf) and the wiring diagram (http://www.goldenmotor.com/HPM%20Wiring%20With%20Contactor.jpg).
The exact configuration will obviously vary according to the available power output of the specific battery/motor combination being used, the vehicle it is powering, and any specific user requirements.
Alan
-
I have now attached a copy of the HPC Series Controllers Software User Guide which has just been discovered elsewhere (https://electrotransport.ru/ussr/index.php?topic=62580.0#topmsg).
Hopefully this will help others using this controller.
Alan