GoldenMotor.com Forum

General Category => User Guides/Catalog => Topic started by: Pawel on October 19, 2016, 09:26:01 PM

Title: PI-400 HPC Controller Programming Kit Software user Guide
Post by: Pawel on October 19, 2016, 09:26:01 PM

Hi!
Do you have programming guide for HPC500H Motor Controller?
What is  the proper configuration for 96V motors?

Title: Re: PI-400 HPC Controller Programming Kit Software user Guide
Post by: Bikemad on October 21, 2016, 09:57:28 AM

Unfortunately there are no specific instructions for using the programming software, the information regarding the HPC controllers can be found in the Controller User Guide (http://www.goldenmotor.com/HPC%20Series%20Controller%20User%20Guide.pdf) and the wiring diagram (http://www.goldenmotor.com/HPM%20Wiring%20With%20Contactor.jpg).

The exact configuration will obviously vary according to the available power output of the specific battery/motor combination being used, the vehicle it is powering, and any specific user requirements.

Alan
 

Title: Re: PI-400 HPC Controller Programming Kit Software user Guide
Post by: Bikemad on October 22, 2020, 03:20:24 PM

I have now attached a copy of the HPC Series Controllers Software User Guide which has just been discovered elsewhere (https://electrotransport.ru/ussr/index.php?topic=62580.0#topmsg).

Hopefully this will help others using this controller.

Alan