GoldenMotor.com Forum
General Category => Magic Pie & Smart Pie Discussions => Topic started by: razor_harm on May 14, 2012, 06:52:20 AM
-
Hi all,
I have purchased a MP3 and installed it onto my bike. It worked great!
However, when I was installing a LED light (with the battery still on), I short-circuited the black and red wire (for LED connection). Ever since, my throttle is dead no matter what I do. Did I destroy my controller? Is there anything that I can do to fix it?
I need help desperately.
-
Hi and(https://i.imgur.com/evDSMvT.png)to the forum.
I suggest you try unplugging the throttle connector and check the voltage at the +5V feed connection as described in this post (http://goldenmotor.com/SMF/index.php?topic=4314.msg25153#msg25153).
If you're very lucky, it might be just the throttle control that has been damaged by shorting the wires, rather than the main wiring harness or controller.
(http://www.arhservices.co.uk/GoldenMotor/emoticons/fingerscrossed.gif)
Alan
-
I changed the controller, still no luck :-[
After talking to Devi-motion (official Goldenmotor dealer in the Netherlands) I have decided to send to the motor to them for repairs.